Forum Topic: Feature Development Plan Update in 2012

  Reply
First 1 2 3 4 Last 
#Topic. 12 Jan 2012 02:57


Hello, 

It´s Christy. How´s everything going with you?

I´ve got thedevelopment schedule for the features from our R&D team this morning. There are good news and bad news..the FBX Loader (supposedly after Q3 2012) will be released in Q2 2012, while some features have been a little delayed upto Q1 2012. Please accept our appologies and be patient for those who have been waiting for the features such as quad mesh, pin synchronization. I will be updating whenever any feature development plan is changed. Thank you for your patience.


 

 

Quarter 1 2012

- Quad mesh
- Pin Synchronization
- Internal Line Crossing, Internal to Boundary Crossing
- Friction (for Cloth-Cloth and Avatar-Cloth) Setting
- Pac File Viewer
- Mac Version
- Linux Version
- Sewing in 3D
- Bump map
- Multi-Avatar, Hair and Accessory Add
- Fabric(Material + Physical Properties) Setting
- KES(Kawabata Evaluation System) Data Import (CLO 3D Only)
- Draw line on 3D and 2D patterns



Quarter 2 2012

MD3, CLO 3D 2012 release, all the following features will be added in this new version;
- Pattern Editing in 3D
- Symmetric Pattern Editing
- Stitch Design and Rendering
- Pattern Grouping
- FBX Loader

 

Future

(TBD, probably done after Q3, 2012)
- SVG Loader (CLO 3D Only, but not confirmed)
- Cross Section Display for Avatar and Cloth
- Ruler for Avatar and Pattern
- Rigid Body Simulation
- Undo in 3D Window
- 1 to N sewing (CLO 3D Only)
- Button (CLO 3D Only)
- Zipper (CLO 3D Only)
- Hem, Piping (CLO 3D Only)
- Pattern Cutting (CLO 3D Only)
- Baseline Drawing (CLO 3D Only)
- Line Segment Point to Curve Point Converting

[Last Modified : 2012-01-18 오후 5:52:45 ]



#1. 12 Jan 2012 04:14

Thank you very much for the update christy.


I am excited about the Quarter 1 releases.  Been waiting for quads, but I think I am more excited about the ability to cross seam lines, Yay!


Take care...

Ken


#2. 12 Jan 2012 04:36
Any news on the cost for the MD3 upgrade?


#3. 12 Jan 2012 12:10

This is all great news and well worth waiting for, but it is better to publish less but more often. If you want to add something new release after two weeks and then have frequent updates. Incremental improvement or "Kaizen" is what´s it called and it was in fact invented in Japan. (by Taiichi Ohno "father to Toyotas production system". Take my word for it, anything else is too dangerous. (I have worked 20 years in the software development business). No doubt you are already (at least now! ;) aware of this. To the others, try to Google Kaizen on Wikipedia.

 


#4. 12 Jan 2012 21:43
I was hoping for a quad mesh update last quarter 2011. But thanks for the heads up.



#5. 13 Jan 2012 01:34
vintorix Wrote:

This is all great news and well worth waiting for, but it is better to publish less but more often. If you want to add something new release after two weeks and then have frequent updates. Incremental improvement or "Kaizen" is what´s it called and it was in fact invented in Japan. (by Taiichi Ohno "father to Toyotas production system". Take my word for it, anything else is too dangerous. (I have worked 20 years in the software development business). No doubt you are already (at least now! ;) aware of this. To the others, try to Google Kaizen on Wikipedia.

 


Thanks for your constructive advice. Yes, true I can´t agree with you enough. Things are sometimes not going like what we expected as scheduled.(at least now!) even though we thought we absolutely could as far as the feature development is concerned. I´ll definetely take it into deep consideration.

[Last Modified : 2012-01-13 오전 10:36:26 ]



#6. 13 Jan 2012 09:36
Thanks so much for the updates!  Lots of goodies to look forward to in 2012!  Yea!  I am happy to wait for the new features to ensure they are all ready to go.   No sense in rushing a good thing.  Solid features are well worth waiting for.  Yea!  You guys rock! :)



#7. 13 Jan 2012 15:49
Thanks for the update. I´d also like to know what the future plan is for the marketplace.

R Y U U - K O U   Fashion trends and ideas.

#8. 13 Jan 2012 21:54
I sorry but  button and zipper should be a part of both programs not just one they are just way too common to be left out of any version



#9. 18 Jan 2012 14:15
Sawven Wrote:
I sorry but  button and zipper should be a part of both programs not just one they are just way too common to be left out of any version
Agreed


#10. 31 Jan 2012 05:36
There is news for a new version with a quad mesh?




  Reply
First 1 2 3 4 Last